W Electronic Power Pack

 

The new W&dB Power-Pack amplifiers have been designed for almost all systems to be configured in auto-amplified mode, simply by extracting the connection board from the passive version, and thus, convert the product into active version with DSP.

 

W PRO2

WPRO2

Out Power 4 ohms

 

Out Power 8 ohms

2 x 700 w

Out Power 2 ohms

 

Bridge

1 x 1400 w 16 Ohm

Frecuency response

20 Hz – 20Khz

Phase response

@ 1w 20Hz-20Khz :+- 15Deg

Harmonic distorsion

20 Hz – 20Khz:<0.05%

Intermodulation distorsion

SMPTE < 0.05%

Crosstalk

20 Hz- 1Khz:> 80db

DSP

Included

DSP Software

Sigma Studio

Dumping Factor

@ 8 Ohms> 1000

Required AC Mains

230V AC Mains @8 ohms 1/8 rated power

Dimensions (wxhxd)

170 x 320 x 85 mm

Weight

2 Kg

W PRO3

WPRO3

Out Power 4 ohms

1 x 2500 w  / 2 x 800 w

Out Power 8 ohms

1 x 1500 w  / 2 x 400 w

Out Power 2 ohms

 

Bridge

2 x 2500 w 4 Ohm

Frecuency response

20 Hz – 20Khz

Phase response

@ 1w 20Hz-20Khz :+- 15Deg

Harmonic distorsion

20 Hz – 20Khz:<0.05%

Intermodulation distorsion

SMPTE < 0.05%

Crosstalk

20 Hz- 1Khz:> 70db

DSP

Included

DSP Software

Sigma Studio

Dumping Factor

@ 8 Ohms> 1000

Required AC Mains

230V AC Mains @8 ohms 1/8 rated power

Dimensions (wxhxd)

210 x 420 x 85 mm

Weight

3 Kg

W PRO4

WPRO4

Out Power 4 ohms

4 x 2000 w

Out Power 8ohms

4 x 1000 w

Out Power 2 ohms

 

Bridge

2 x 3000 w 8Ohm

Frecuency response

20 Hz – 20Khz

Phase response

@ 1w 20Hz-20Khz :+- 15Deg

Harmonic distorsion

20 Hz – 20Khz:<0.05%

Intermodulation distorsion

SMPTE < 0.05%

Crosstalk

20 Hz- 1Khz:> 70db

DSP

Included

DSP Software

Sigma Studio

Dumping Factor

20Hz – 500Hz@ 8 ohms >500

Required AC Mains

230V AC Mains @8 ohms 1/8 rated power

Dimensions (wxhxd)

210 x 420 x 85 mm

Weight

3,4 Kg

Power Pack sample

The new W&dB power modules allow configurations to be used as individual amplifiers for each model or can be used as a multi-channel amplifier to feed other units, for example, from the subwoofer or a linear array system using one active and another slave, this page includes an example of amplification from the subwoofer to another subwoofer of 1 x 18 “and to four units of the Nova 8.2 system, this way saves space and greatly simplifies the assembly. The power module delivers 2500 W for both subwoofers and 800 + 800 W forthe “Array” cabinets.

Share This