VENTO ONE
This cabinet is made of birch Wissa-Plywood. The rigging suport system is manufactured in aeronautical spec aluminum and steel. Speakon NL4 connectors are used for power amplifier conections .
The paint finish is high resintance polyurea.
- Two-way active line array system.
- Includes one 12″ neodymiun low weigth loudspeaker of high magnetic strength and big thermal dissipation.
- Includes one 1.4″ compression driver coupled to a W&dB wave guide.
- Duralumin and galvanized steel integrated rigging hardware into each cabinet.
- The waveguides dispersion beam is 7º vertical and 120º horizontal.
| Transducers | 1 X 12″/ 1 X 1.4″ |
| Coverage | 120° H x 7° V |
| Nominal impedance | LF 8Ω – HF 8Ω |
| Power AES | 800W |
| Maximun Peak SPL | 138 dB SPL |
| Frecuency Range | 50 Hz to 18 kHz |
| Sensibility (1 W@ 1m) | 1 w@ 1 m: 98 dB |
| Weigth | 28 Kg |
| Enclosure Geometry | Trapezoidal |
| Angle adjustment | 1 º to 1 º |
| Dimensions (WxHxD) | 669 x 328 x 489 mm |
| Enclosure Material | Birch Plywood 15/18 mm |
| Rigging | Steel & Aluminum |
| Finish | Polyurea |
| Colour | Black |
| Connections | 2 x Speakon NL4 |
VENTO THREE
